Indirect Fired Storage Water Heater
The Reco Thermo-Plate PAC is a fully packaged indirect hot water heater with a storage tank. Water typically from a condensing boiler serves as the heating source for this indirect water heater and provides efficient potable water.
With a plate-type heat exchanger, the system can provide efficient heat transfer at boiler water temperatures below the capabilities of traditional U-tube bundles. Each component is carefully selected for high performance in the most demanding applications.
All components on the potable water side are constructed with non-ferrous material. Whether you are heating potable water in a commercial building or process water for an industrial application, you can select a RECO Thermo-PlatePAC to do the job.
Applications
Schools, industrial facilities, office buildings, nursing homes, sports venues, hospitals, hotels, heat recovery systems.
Features and Benefits
Safety, Quality, Reliability
- Complies with NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content requirements for“lead-free” plumbing as defined in the U.S. Safe Drinking Water Act.
- Temperature interlocked controls with secondary over-temperature protection.
- Replaceable brazed plate or serviceable plate and frame heat exchanger.
- Heavy duty construction withstands demanding commercial/industrial use.
Packaged System
- Factory selected and sized controls, valves and pipework ensure optimum performance.
General
- Welded carbon steel vessel designed and built in strict accordance with the ASME Code Section VIII and stamped, certified, and registered with the National Board of Boiler and Pressure Vessel Inspectors.
- All internal storage tank surfaces are lined with a minimum 5/8″ thick cement for superior protection and tank longevity.
- Factory sized and installed heat exchanger with a generous heating surface designed to ensure reliable operation.
- Operating controls are factory selected, sized, piped and tested to ensure reliable operation.
- Modulating control valve (Specify: 2-way or 3-way) to regulate the flow of boiler water through the heat exchanger.
- ASME rated combination T&P relief valve set at the tank working pressure.
- Heavy duty insulation and jacketing for maximum operating efficiency and minimal stand-by heat loss.
- Standard full five (5) year tank warranty and a one (1) year component warranty. Optional extended warranties.